Saleen Speedlab Officially Announces the SuperShaker
Posted 7.20.2008 in New Products
Saleen's Aftermarket Division, SpeedLab, announced today the introduction of a new technology for air induction systems called the SuperShaker™. The patent pending
SuperShaker™ embodies the classic appeal of shaker hood styling while delivering exhilarating performance via modern Supercharger technology.
By combining the proven efficiency of the Saleen series VI intercooled supercharger with that of the new and highly efficient SuperShaker™ induction system, SpeedLab has
brokered the perfect marriage; bringing together Beauty AND Beast for the first time.
Continue Reading...
|
Unleash up to 700 Horsepower with New TVS2300 ROUSHcharger
Posted 7.10.2008 in New Products
ROUSH Performance has always been the leader in powertrain performance and with the introduction of the new TVS2300 ROUSHcharger it is possible for owners of any 2005
to 2009 Ford Mustang GT to inject up to 700 horsepower under the hood.
The new TVS2300 ROUSHcharger will be available in a variety of packages to fit the needs from enthusiasts wanting a new complete kit with a warranty, those simply
looking to get the maximum horsepower with a custom tune, and owners wishing to upgrade a car with an existing ROUSHcharger system. The new TVS2300 ROUSHcharger was
first used on the 2008 ROUSH P-51A Mustang vehicle builds to much acclaim.
Continue Reading...
|
Comp Cams Announces High Load Beehive Valve Springs for Modular 2 & 3 Valve Engines
Posted 5.6.2008 in New Products
Realizing the tremendous power potential the Ford 4.6L & 5.4L, 2 & 3 Valve Engines have to offer, enthusiasts are now pushing them to new levels of
performance, often utilizing superchargers, turbochargers and very aggressive camshaft profiles. However, these performance upgrades only
highlight the shortcomings of factory and inferior aftermarket valve springs. If not addressed properly, improper valve spring selection can lead
to lackluster performance, valve float and, in severe cases, valve spring failure. Enter COMP Cams with the industry's most technologically advanced
valve spring for Ford 4.6L & 5.4L, 2 & 3 Valve Engines with aggressive performance upgrades.
Continue Reading...
|
New Product: Steeda Adjustable Watts Linkage System
Posted 5.3.2008 in New Products
The Steeda Autosports Engineering Team latest creation is a technologically advanced and high performing suspension upgrade for your 2005 through 2008 Mustang.
Under development for an extended period of time, Steeda Engineers using ISO 9001-2000 Certified Procedures, set a new benchmark standard for Watt’s Linkage suspension
systems for the Ford performance enthusiast.
Continue Reading...
|
Corsa Performance Announces Ultimate Touring Exhaust for S197 Mustangs
Posted 4.10.2008 in New Products
Corsa Performance Exhausts has developed the new Ultimate Touring Exhaust – a full axle-back exhaust system designed to tame some of the thunder of highly modified S197
V8 Mustangs. The Ultimate Touring Exhaust utilizes Corsa’s patented Reflective Sound Cancellation (RSC) technology to tone down the wide range of sound frequencies that
are found in high-horsepower Mustangs that have been modified with headers, high-flow catalytic converters, superchargers, head and cam packages and more.
Continue Reading...
|
New Product: JLT Carbon Fiber Dress Up Parts
Posted 3.26.2008 in New Products
JLT, home of the JLT True CAI, is proud to introduce its new line of carbon fiber parts for S197 Mustangs. The initial products include a radiator support cover,
fuse box cover, and plenum cover. More carbon fiber parts will follow soon.
Continue Reading...
|
Saleen Speedlab Announces New Power Packs up to 600 bhp
Posted 3.17.2008 in New Products
Saleen Speedlab has released its power package lineup for 2008, including three separate supercharger kits up to 600 horsepower (flywheel hp, not rwhp). Mustang GT owners
can start with the 435 hp kit available at a retail price of $5,699.00, or can spend up to $7,199.99 for the race-only 600 horsepower kit that pushes 15 psi of boost
through Saleen's Series VI supercharger, allowing 1/4 mile times of approximately 11.5 seconds at 125 mph. Those Mustang owners who already have a Saleen supercharger
system can also purchase upgrade kits to boost horsepower to 475, 550, or 600. Also on the product list is a heavy duty heat exchanger upgrade kit and a cold air
induction kit that were introduced on the S302 Extreme model.
Continue Reading...
|
Saleen Makes Heritage Body Kit Available for Purchase
Posted 3.15.2008 in New Products
Coming off the success of the Parnelli Jones Mustang in 2007 and the H281, H302, and H302 Supercharged Mustangs in 2008, Saleen is offering the Heritage body kit
available to all S197 Mustang owners. The body kit can be purchased as a complete kit, or individual pieces are available individually. The full kit includes a new
front and rear fascia, side skirts, rear wing, shaker hood intake kit, rear louvers, and quarter window panels.
Continue Reading...
|
Steeda Announces "Adaptive Performance Calibration" for S197 Mustangs
Posted 2.28.2008 in New Products
Steeda has announced a revolutionary solution to the calibration dilemma: The Adaptive Performance Calibration. Not a band-aid approach like all the other aftermarket
calibrations, these are completely new computer instructions that have been integrated into the production Mustang engine powertrain control system that AUTOMATICALLY
adapts to ALWAYS provide you with the best possible tune for the equipment you add to your car and for your specific driving conditions, fuel, aftermarket modifications
without compromise to your vehicle’s engine management system and its subsystems.
Continue Reading...
|
Add More Functionality to Your Mustang with the Roush Vent Gauge Pod
Posted 2.26.2008 in New Products
True performance drivers want to know exactly what is going on with their vehicle at all times, but much of this detailed information is typically only available through
supplemental gauges. But at a minimum, adding an accessory gauge increases clutter and decreases visibility around the dashboard, and typically requires some form of
cutting or drilling into your valuable vehicle.
Continue Reading...
|
New Product: Saleen Speedlab ShakerCharger
Posted 2.26.2008 in New Products
Saleen Speedlab is set to announce an exciting new product for S197 Mustang owners - the ShakerCharger. Combining the power of their Series VI twin-screw supercharger
with a functional shaker hood scoop, Speedlab is allowing owners to add a retro look as well as forced induction to their Mustang. The scoop, which requires a cutout in
the hood, feeds cold air directly into an airbox that sits above the supercharger.
Continue Reading...
|
New Product: Stillen Introduces New Body Components
Posted 2.18.2008 in New Products
Looking for something to spice up the look of your Mustang? Add an aggressive look to your Mustang with STILLEN urethane body components.
Designed in house to compliment the lines of the stock body, STILLEN urethane components are then prototyped, and molded in our state of the
art facilities in Costa Mesa, California. The result – an aggressive look that looks and fits like OEM.
Continue Reading...
|
New Product: Roush/Ford Racing Announce GT500 Supercharger Upgrade
Posted 10.26.2007 in New Products
Owners of the new Ford GT500 are justifiably proud of their car and proud of the 500 horsepower under the hood. Now the engineers
at ROUSH and Ford Racing Technologies, the collective leaders in Ford powertrain development, have unveiled a new Ford Racing
GT500 Supercharger which boosts the performance to 605 horsepower.
Continue Reading...
|
|
|
